REEDS SECTION HOUSE - ' Up Front' Series Kit

Upgraded version of kit # 1001 features full, accurate interior framing and inside wall sheathing detail, 2cd floor, stairs, operational doors and windows.                                                                                                                       Interior framing consists of one piece peel and stick cuttings for each wall.  Jigs included for easy window, stairs, and rafter assembly.

O scale kit # 1002     $67.95      (4" siding)

O scale kit # 1002-a  $67.95     (6" siding)

REEDS MILLS DEPOT- On the Sandy River & Rangeley Lakes

Laser-cut plywood and basswood with peel and stick parts.  Battens are done as one peel and stick panel per side.  Platform can be built as shown or flat. 

Includes interior walls and floors, cast chimney, peel and stick paper shingles, plastic glazing, and fully illustrated instructions.

Footprint is 10 3/4" x 6" including platform. Add 1" to width for rear roof overhang. Rear wall has 1 window located approx. opposite waiting room door.

O scale kit # 1003     $95

Laser-cut basswood walls, plywood windows, doors, and trim, chipboard roof.  Craft paper shingles and printed signs.  Building can be built without the bay window as the wall behind is blank.

O scale kit #1010-O      $98.00        Footprint is 6 1/2" x 5 1/4". 

HO scale Kit #1010H    $39.95       Footprint is 2 3/4" x 3 1/2".   

Laser -cut plywood, basswood, and paper shingles. Etched nail head detail on platform sides. Peel and stick trim parts. Also includes white metal stove pipe.                                                                                                                       Option of building as a tool house with larger door.  Now includes correct paneled door.

O scale kit  #1011O     $24.95    Footprint is 4-1/2" x 3- 5/8" wide.

S scale kit  #1011S      $31.95    Footprint is 3' x 2-5/8" wide.

HO scale kit  #1011H   $18.95     Footprint is 2-1/4" x 2" wide.

 

Seen all over the northeastern US in every town and village.  Our kit depicts a smaller version with a back ell kitchen. A must have for the New England modeler of any era.                                                                                                 Optional bay window, front door canopy, and canopy brackets. 

Kit consists of laser-cut clapboard siding, basswood, 1/64" 'laserboard' w/peel and stick, chipboard, peal and stick paper shingles or 'steel' roofing, plastic chimneys, and mylar glazing.                                                                                 Foundations are wood with etched brick detail.  All trim and windows are cut from 1/64" 'laserboard' so there is no grain going in the wrong direction.

Kit as shown at left w/ front door on left, steel roof and 3 window bay window:

O scale Kit #1012Oa        $85                  Footprint:  4 5/8" x 12"

S scale  Kit #1012Sa        $64                Footprint:  3 1/2" x 9 3/8"

HO scale Kit #1012Ha      $49.95           Footprint:  2 1/2" x 6 1/2"   

Kit as shown at left with front door on right, 'asphalt' shingles, 2 window bay window, cellar windows:

O scale Kit #1012Ob        $85                Footprint:  4 5/8" x 12" 

S scale  Kit #1012Sb        $64                 Footprint:   3 1/2" x 9 3/8"  

HO scale Kit # 1012Hb     $49.95           Footprint:  2 1/2" x 6 1/2" 

 

This is a small version of a Greek Revival style New England carriage house.  These structures were built as stand-alone or incorporated into a connected structure complex.

Kit consists of the same materials as the NE Farmhouse kit #1012.  Included are 2 styles of 'barn' door and an optional hay loft door.  Lower foundation is wood with etched brick detail.

Kit as shown at left with barn door on the left and steel roof:

O scale Kit #1013Oa       $48               Footprint:   4 1/2" x 6"

S scale  Kit#1013Sa        $35              Footprint:  3 3/8" x 4 1/2"

Footprint: 2 1/2" x 3 1/2" 

Kit as shown at left with barn door on the right and 'asphalt' shingle roof:

O scale Kit #1013Ob         $48             Footprint:   4 1/2" x 6" 

HO scale Kit #1013Hb      $29.95         Footprint: 2 1/2" x 3 1/2"

This is the 'in-town' version of  the  New England connected Farmhouse complex as seen all over the northeastern US.  A must have for the New England modeler of any era.

This kit consists of our New England Farmhouse and Small Carriage house. These buildings have a low brick foundation as well as the optional parts found in the farmhouse and carriage house kits.

Kit as shown at left with  dooryard on left and steel roof:

O scale Kit #1014Oa        $132              Footprint:  8" x 17 1/2" 

S scale  Kit #1014Sa        $99             Footprint:  5 3/4" x 13"

HO scale Kit #1014Ha      $79.95           Footprint: 3 1/2" x 9 1/2" 

Kit as shown at left with right dooryard and 'asphalt' shingle roof:

O scale Kit #1014Ob       $132               Footprint:   8" x 17 1/2"

S scale  Kit #1014Sb       $99              Footprint:   5 3/4" x 13"

HO scale Kit #1014Hb     $79.95           Footprint: 3 1/2" x 9 1/2" 

N scale version of the house with ell and carriage house.  Carriage house can be built as a stand alone structure.   Steel roof version only.

Kit includes our EZ-semble windows and plastic chimney.

N scale Kit! 1014-N             $36.00          Footprint: 2 1/2" x 5"

Seen all over the northeastern US in every town and village. A must have for the New England modeler of any era.  Half of the shed would be used as a wood shed so the kit has a 'wood' door on the rear.                                                     Can be built without front porch.

Kit consists of laser-cut clapboard siding, basswood, 1/64" 'laserboard' w/peel and stick, chipboard, peal and stick paper shingles, plastic chimneys, and mylar glazing.                                                                                                        Foundations are wood with etched brick detail.  All trim and windows are cut from 1/64" 'laserboard' so there is no grain going in the wrong direction.

O scale kit #1051-O         $90                  Footprint: 4 5/8" x 10 1/4"

HO scale kit #1051-H         $49.95         Footprint: 2 1/2" x 6" 

This freelance kit depicts a single stall barn type firehouse found in many small towns in the early to mid part of the 20th century.  Some can still be found today in out-of-the -way places. 

Kit includes laser-cut parts, peel-and-stick shingles, plastic chimney, metal and wood details, laser etched foundation.     Footprint:  2 1/2" x 4 1/2"

HO scale Kit #1015-H    $37.95

Laser etched wood, unpainted, Pkg of 4

Kit # H-101     $2.95

Easy to assemble. Includes laser-cut basswood parts, plastic details, paper corrugated roofing, full illustrated instructions.  Bachmann Coal Tower kit not included.  

Kit #1016  $20.95  O scale

Based on a store in Andover, Maine.

Kit includes laser-cut parts, peel-and-stick steel roofing, plastic chimney, plastic details, and laser etched foundation.     Footprint:  3" x 7 3/4"

HO scale Kit #1017-H    $52.00

Based on photos of a building in Emu Flat, Victoria.

Easy to build kit includes laser-cut basswood and plywood, molded wood corners, Tichy windows and doors, corrugated paper roofing, cast metal roof vents, and photo illustrated instructions.                                                                        Optional small shed wall with/without door. Small shed is also optional.     Footprint: 4" x 4 1/2"

 HO scale  Kit #1020-H    $45

Based on a building in South Carver, Mass.  Can be used as any kind of small warehouse/shed.  Kit consists of laser-cut basswood  with shingle lines etched in, paper corrugated roofing,                                                                             our new easy to assembly laser-cut laserboard windows, and photo illustrated instructions.

N scale Kit  #1021-N      discontinued   Footprint:  2 1/4" x 2"

HO scale Kit #1021-H     $39     Footprint:  3 1/2" x 4"    

S scale Kit #1021-S        discontinued      Foot print:  5" x 5 3/8"  

  O scale Kit #1021-O        discontinued     Footprint: 7 1/2" x 6 1/4"

 

Click on the upper photo for more views.

The Sally Jo Mine is typical of the mine head structures found in the Rocky Mountains in the late 1800's early 1900's.

The Sally Jo Mine complex consists of the the tall mine head structure with rooftop mounted watertank, a boiler house and smoke stack on the rear, and the loading house with support trestling on the front.                                                   Chutes are included for 2 tracks or 1 track under and a waste pile beyond.

This easy to build  kit includes laser-cut plywood walls, easy to assemble Laserboard windows with pre-cut glazing, milled wood angle corner trim, corrugated card roofing, pre-cut trestling, and plastic details.

Footprint as shown: 10"w x 11"d x 12"h.  The mine house itself is 3 1/2"d.

O scale  Kit #1032-O         $139

Click on the photo for more views.

The House at 16 Elm St.

A typical New England farmhouse style house with an enclosed wrap-around porch and shed on the back.

Kit consists of laser-cut basswood, plywood , and laserboard.  Includes our EZsemble windows, plastic chimney and plumbing vent pipe.

HO scale  Kit #1033-H          $78          Footprint:  6" x 3 3/4"    

Click on the photo for more views.

Kit consists of laser-cut basswood, plywood , and laserboard.  Includes our EZsemble windows, white metal vent pipe, 2 plastic trash barrels, a laser- etched air conditioner, front lamp casting, and various signage.                                 Fence not included.

HO scale  Kit #1034-H          $29         Footprint:  3" x 2 1/2"    

Consists of laser-cut plywood beams with Laserboard 'I' beam detail (no rivet detail).  The  main beams are each 2 layers of 1/16" plywood  for strength, cross beams are 1/16" plywood.                                                                                  The bridge can be left loose on the deck for easy track cleaning.

Main beams are spaced to run below the rails.   Bachmann Truss Bridge kit not included.

O Gauge   Kit#1035a    $27

On30         Kit#1035    $27  

The perfect miner's or lumberjack's accommodation.  Other uses include a yard office, hunting cabin, backyard shed or workshop, a section house, a cabin at a motor court.

Kit includes laser-cut basswood, plywood, strip wood for corner posts and foundation, peel and stick door, and our EZ-semble windows. 

O scale Kit #1036-O         $28                Footprint:  2 1/2" w x 3 1/2" d

click for more photos

A small cement block factory building with rear shipping area.  Large windows make this perfect for interior machinery detail (not included).

Kit features laser-etched basswood 'cement block' walls with corner finger joints. Peel-and-stick wood and laserboard parts, interior floors, plastic exterior lights, barrels, and smoke jacks, decals,                                                                                          and a pair of our laser etched wood window air conditioners.  Click on the photo for rear side view. 

HO scale Kit #1037-H          $59                 Footprint:  3" x 7 3/4" + 1 1/2"  for the rear shipping pad.

click  for more photos

An old-time drinking/dancing establishment.  These can still be found in rural towns today.

Can also be used as a general store with attached post office.

Kit consists of laser-cut bass and plywood, Tichy plastic windows, doors, and details, laser-cut wood benches, pre-cut  corrugated paper roofing, etched wood chimney, and peel-and-stick roof seams.

HO scale Kit # 1038-H      $69                Footprint:   5 1/2" x 7 1/2"

We can substitute peel-and-stick shingles for the corrugated roof no extra charge.  Direct orders only.     Just mention the fact when ordering .     

A small neighborhood grocery store once located in Salem, Oregon.

Kit consist of laser-cut bass and plywood, peel and stick shingles, Tichy windows and doors and chimney, and laser-printed signs.

HO scale Kit # 1039-H        $29              Footprint:  3 3/8" x 2 1/4"

1895 Passenger Depot           HO, S and O scales

Chicago, Milwaukee & St Paul standard design

HO scale kit (red at left) is based on the C,M & St P depot at Lemotte, Iowa on the Bellevue and Cascade narrow gauge RR, which was a mirror image to the standard drawing.                                         

We can cut your depot reversed (like the yellow one at left) for the  standard C,M,& StP depot, just let us know when/after you order.                                                                                                                           

Easy to build laser-cut plywood and basswood. Peel and stick windows and roof shingles. Plastic chimney, laser curt wood roof brackets.

HO scale Kit # 1040-H     $39        Footprint:  5 3/4" x 3 1/2"

S and O scale kits (yellow at left) is based on the standard C,M & St P drawing. 

Easy to build laser-cut plywood and basswood. Peel and stick windows and roof shingles. Laser etched wood chimney, laser curt wood roof brackets.                                                                                              

We can cut your depot reversed (like the red one at left) for the LeMotte, Iowa  depot on the Bellevue and Cascade narrow gauge, just let us know when/after you order.

S scale Kit # 1040-S     $64           Footprint:  7" x 4 1/4"

 

Based on Chicago Great Western prototype. Similar to kit 1040 but with one freight door on the end of the station and an angle sided bay window.

HO scale kit #1041-H          $39          Footprint:  5 3/4" x 3 1/2"

S scale kit # 1041-S            $64          Footprint:  7" x 4 1/4"

O scale kit # 1041-O           $99.95     Footprint:  10 1/2" x 6 1/2"

Stinchfield's Hardware Store                                  

A typical New England 2 store store building with a community hall on second floor.

Laser cut basswood and plywood.  Tichy plastic windows, doors, chimney, and veranda posts.         Peel and stick shingles and roofing paper.

HO scale Kit #1043-H         $78        Footprint: 3 3/4" x  8"

Section Car Shed                                                     

Based on a DM&N Ry strusture.

Easy to build laser-cut plywood and basswood. Plastic windows and door hinges.  Peel and stick 'diamond' shaped shingles.

HO scale Kit # 1044-H     $15            Footprint: 1 1/2" x 2 1/4"

 

Typical corrugated iron on wood frame structure.  Warehouse with doors on one end, store on the other. Includes laser-cut plywood framing and trusses,                                                                                                                                 pre-cut corrugated paper siding and roofing, plywood base, Tichy plastic lamps and feed bags, paper signs.

HO scale Kit #1045-H      $59           Footprint: 7 1/2" x  4"

Laser-cut plywood and basswood.  Optional dormers. Tichy plastic windows in the factory, laser cut in the boiler house. Laser etched wood chimney and foundation.                                                                                                               2 plastic cyclones. Laser-cut peel and stick shingles and roofing. Loading docks on three sides.

S scale Kit #1046-S      $139           Footprint: 14 1/2" x  7"     8 1/2" high