Mount Blue Model Co.

MOUNT BLUE MODEL CO.

HO Scale

Narrow Gauge Car Kits

+ All kits now include our own laser etched brake wheels. +

These fine-scale kits include all the wood parts for one car. Kits feature full interior detail; peel and stick parts;

2 side etching; 1 piece center sill, outer sill, end beam, bolsters piece; etched tin roof seams; correct style ladder rails.

Some kits require detail parts, wire, trucks, couplers, and lettering to complete (except as noted).



	Sandy River RR early Dyer built 24' boxcars. SR&RL #61 - 66 HOn30 Low roof car. A photo shows at least car #65 was still around when the class 121 cars arrived. Some of these cars were transfered to work service ie: 561, 570. Trucks, couplers, and lettering not included. Kit #61-H $23.00
	SR&RL Boxcar 67 & 68 in rebuilt form. HOn30 These cars were shortened from standard 28' cars to expose the end beams. Has correct 4 rung ladders on sides and 5 on ends. Kit #67-H $16.00
	SR&RL 6, 7, or 8 stake pocket, 28ft Flatcar. 2 cars per kit HOn30 Kit includes scale sized 3D printed stake pockets by Jeff Bissonette, plastic details, one piece floor, pre-drilled outer sills. Trucks, couplers, and lettering not included. Kit #215-H 6 pocket $22.00 Kit #217-H 7 pocket $22.00 Kit #218-H 8 pocket $22.00
	SR&RL 70 series 28 foot boxcars. Cars # 67 -76. HOn30 Measurements taken from original car #73 at Phillips, Me. Kit #70-H $16.00
	SR&RL 80 series 28 foot boxcars. Cars # 77 - 86. HOn30 Measurements taken from original car #73 at Phillips, Me. Comes with peel and stick door hanger and corner iron re-enforcement details. Kit #80-H $17.00
	SR&RL 90 series 28 foot, low roof, boxcars. Cars # 87 - 99. HOn30 Kit #90-H $16.00

	SR&RL Boxcar #95 as rebuilt with exposed end beams. HOn30 This car also was devoid of drip edging on the roof, the roof tin being nailed directly to the trim boards. This kit replicates that detail. This kit also features the 'stand-off' style ladder rails. Kit # 95-H $16.00
	SR&RL 104 series 28 foot boxcars. Cars # 104 - 108 HOn30 With optional end door. Kit #104-H $18.00
	SR&RL Cream car/boxcar #21/59 HOn30 Two kits available for this unique car. Each comes with detail parts, less trucks and couplers. Kit #59-H $28.00 SR&RL #59 standard boxcar. Kit #59a-H $ 28.00 SR&RL Cream car #21/59
	SR&RL 121 - 125 series 28 foot boxcars in 'as delivered configuration. HOn30 Kit features 'as delivered' roof walk supports, end door, and offset body. These cars, built by the MEC in 1912 were configured so the brake staff ran behind the end sill rather than through it. Our kit correctly reflects this construction detail. Kit includes wood parts only. Kit #121-H $18.00
	Wiscasset, Waterville and Farmington Ry 28 foot boxcar #309 HOn30 This kit features the random siding width of the original car as well as the correct interior sheathing arrangement. Also included are all the detail parts to complete the body. Trucks and couplers not included. Kit #309-H $28.00
	Wiscasset, Waterville and Farmington Ry 28 foot boxcar #302 w/ wide door HOn30 This kit features way car windows closed in with car siding as well as the correct interior sheathing arrangement. Also included are all the detail parts to complete the body. Trucks and couplers not included. Kit #302-H $28.00

Wiscasset, Waterville and Farmington Railway Milk cars #65,72,73 HOn30

This kit includes parts to model any one of the three cars. Includes 3D printed smoke jack, plastic details, brass grabs, laser etched door hinges and latch, and correct custom decal lettering. Trucks and couplers not included.

Kit #65-H $29.00

Wiscasset, Waterville and Farmington Railway 30 ft Boxcars #65 - 74 HOn30

This kit does not have a detailed interior or positionable doors. Includes plastic details and Tichy grab irons.

Trucks, couplers, and lettering not included.

Kit #66-H $28.00

	Wiscasset, Waterville and Farmington Ry 28 foot boxcar #303 HOn30 This kit features way car windows closed in with car siding as well as the correct interior sheathing arrangement. Also included are all the detail parts to complete the body. Trucks and couplers not included. Kit #303-H $28.00
	Wiscasset, Waterville and Farmington Ry Early 28 foot boxcar #21-25, 31-36 HOn30 This kit features old style end ladders, 'z' lower door slide, full sheathed interior. Also included are all the detail parts to complete the body. Trucks and couplers not included. Kit #32-H $21.00
	Wiscasset, Waterville and Farmington Low roof 30 foot boxcars #33 - 43 (odd numbers) HOn30 Wood parts only. Kit #33-H $18.00
	Wiscasset, Waterville and Farmington Ry Boxcars #80 - 82 HOn30 Wood parts only. Kit #81-H $18.00
	Wiscasset, Waterville and Farmington Ry Rebuilt 28 foot boxcars #308 + 312 2 car kit. HOn30 This kit features 2 full cars. Includes full separate vertical and horizontal sheathing pieces, fully sheathed interior, extra ends. Also included are all the detail parts to complete the body. Trucks and couplers not included. Kit #310-H $49.00
	Sandy River RR Work Caboose HOn30 This kit is based on three photos of a caboose type car rebuilt from an early Dyer 24' boxcar. Trucks and couplers not included. Kit #12-H $24.00

	Kennebec Central 24 ft boxcar with small end door Features interior detail, etched door hanger, hinge, and door latch details. Trucks and couplers not included. Kit #KC1-H $23.00

SR&RL RR CABOOSE # 556- 558 HOn30

These 3 almost identical cars were built by the Maine Central RR in 1913. Two of the cars survived the RR. Measured from the original 556 in Phillips, Maine. Details match the prototype. These kits consist of laser-cut plywood and basswood with peel and stick parts. Kit also contains brass smoke jack and 557-558 ends, doors ,and floor. Trucks and couplers not included.

Kit #556-H $48.00

ET & WNC RR 32 foot Boxcar. HOn3

Includes laser-etched tin style roof, two different end facia, three different body bolsters, Grandt air cylinder/reservoir, and monofilament line truss rods.

Kit also includes two-sided etching, interior detail, 1 piece frame, and details in plastic and etched laserboard.

Truck and couplers not included.

Kit #ETWNC-1H $34

ET & WNC RR 37 foot offset door Boxcar. HOn3

This is the long boxcar with offset door for long lumber loading. Kit includes laser-etched tin style roof, laser etched steel beam type body bolsters, Grandt air cylinder/reservoir, and monofilament line truss rods.

Kit also includes two-sided etching, interior detail, 1 piece frame, and details in plastic and etched laserboard.

Truck and couplers not included.

Kit #ETWNC-2H $35

ET & WNC RR 37 foot flat / gondola/ wood car. Two cars per kit. HOn3

This double kit includes laser-cut basswood 1 piece frame, stakes and side boards, laser etched steel beam type body bolsters, Grandt air cylinder/reservoir, and monofilament line truss rods.

Kit also includes jigs for side assembly for 1 and 3 board gondola and wood car sides, and details in plastic and etched laserboard.

Truck and couplers not included.

Kit #ETWNC-4H $35 Two car kit.

HOn30 Freelance Diesel body. Fits on the N scale LifeLike SW chassis.

Kit consists of laser-cut plywood and laserboard, finely detailed grill frames, window gaskets, and hood door louvres. Cab can be oriented for long or short hood leading. Chassis not included.

Kit #18a-H $25.00

HOn3 24 foot Boxcar based on a Bellevue and Cascade car.

Laser-cut wood kit includes interior detail w/ 2 sided etching, 1 piece under frame, optional end doors. Also includes plastic and laser engraved details including door latch, Tichy grab irons. Less trucks and couplers.

Kit #HOn3-24-1 $28

HOn3 24 foot Refer

Laser-cut wood kit includes 1 piece roof walk/ ice hatch etching, 1 piece under frame, optional end doors. Also includes plastic and laser engraved details including door latch, Tichy grab irons. Less trucks and couplers.

Kit #HOn3-24-2 $29

	HOn3 28 foot Boxcar lengthened version of the 24 foot boxcar (24ft shown in photo) Laser-cut wood kit includes interior detail w/ 2 sided etching, 1 piece under frame, optional end doors. Also includes plastic and laser engraved details including door latch, Tichy grab irons. Less trucks and couplers. Kit #HOn3-24-1 $28
	HOn3 24 foot Stockcar Laser-cut wood kit includes 1 piece under frame, positionable side and end doors. Also includes plastic and laser engraved details including door latch, Tichy grab irons. Less trucks and couplers. Kit #HOn3-24-3 $30
	Colorado Central 24 ft boxcar #1620 Laser-cut wood kit includes interior detail w/ 2 sided etching, 1 piece under frame, optional end doors. Also includes plastic and laser engraved details including door latch, Tichy grab irons. Less trucks and couplers. Kit #CCRR1620-H $28
	Colorado Central 24 ft boxcars # 1 - 8 Laser-cut wood kit includes interior detail w/ 2 sided etching, 1 piece under frame, optional end doors. Also includes plastic and laser engraved details including door latch, Tichy grab irons. Less trucks and couplers. Kit #CCRR4-H $28

Marsh Creek series 20 foot cars Boxcar

Easy to build, laser-cut plywood with basswood frame. Laser engraved Laserboard details. Tichy grab irons. Optional end door. Reqiures Microtrains N scale archbar trucks and 1015 couplers.

Boxcar Kit# MC-1 $19

Marsh Creek series 20 foot cars Refer

Easy to build, laser-cut plywood with basswood frame. Laser engraved Laserboard details. Tichy grab irons. Reqiures Microtrains N scale archbar trucks and 1015 couplers.

Refer Kit# MC-2 $19

Marsh Creek series 20 foot cars Flat/Gondola

Easy to build, laser-cut plywood with basswood frame. Laser engraved Laserboard details. Cast stakes. Reqiures Microtrains N scale archbar trucks and 1015 couplers.

Flat/Gondola Kit# MC-3 $16.50

Marsh Creek series 20 foot cars Flat/Gondola

Easy to build, laser-cut plywood with basswood frame. Laser engraved Laserboard details. Cast stakes. Reqiures Microtrains N scale archbar trucks and 1015 couplers.

Flat/Gondola Kit# MC-3a $20

Marsh Creek series 20 foot cars Stockcar sheathed ends. (red car at left)

Easy to build, laser-cut plywood with basswood frame. Laser engravewd Laserboard details. Tichy grab irons. Reqiures Microtrains N scale archbar trucks and 1015 couplers.

Stockcar Kit# MC-4 $19

Marsh Creek series 20 foot cars Stockcar braced ends. (black car at left)

Easy to build, laser-cut plywood with basswood frame. Laser engraved Laserboard details. Tichy grab irons. Reqiures Microtrains N scale archbar trucks and 1015 couplers.

Stockcar Kit# MC-4a $19

Marsh Creek series 20 foot cars Outside braced boxcar

Easy to build, laser-cut plywood with basswood frame. Laser engraved Laserboard details. Tichy grab irons. Reqiures Microtrains N scale archbar trucks and 1015 couplers.

Outside braced boxcar Kit# MC-5 $19

Marsh Creek series 20 foot Work Caboose

Easy to build, laser-cut plywood with basswood frame. Laser etngraved Laserboard details. Reqiures Microtrains N scale archbar trucks and 1015 couplers.

Work Caboose Kit# MC-6 $20

	Marsh Creek series 20 foot Caboose Easy to build, laser-cut plywood with basswood frame. Laser engraved Laserboard details. Reqiures Microtrains N scale archbar trucks and 1015 couplers. Caboose Kit# MC-7 $20
	Marsh Creek series 20 foot Caboose II Easy to build, laser-cut plywood with basswood frame. Laser engraved Laserboard details. Reqiures Microtrains N scale archbar trucks and 1015 couplers. Caboose Kit# MC-8 $20